Post by christopher on Nov 25, 2014 1:16:40 GMT -5
After a turn to a certain Angle, the pilot will be reset, loosen the pedal, compressive bar to the right at the same time, roll to horizontal position
again, back to the bar. This completes a left turn. The turn most of the time the aircraft is to use lever is complete, we play model aircraft should be
clear, the rudder is cross linkage is adjusted before takeoff and landing and will only be used when running, the air turns completely rely on the
aileron and elevator.
RC top models
again, back to the bar. This completes a left turn. The turn most of the time the aircraft is to use lever is complete, we play model aircraft should be
clear, the rudder is cross linkage is adjusted before takeoff and landing and will only be used when running, the air turns completely rely on the
aileron and elevator.
RC top models